Alpine SEA-8081 - Manual (Page 134)

134
English
English/Français/Español
Function Setup
Programmable Features
700msec: The door unlock pulse will be set
to 700m seconds.
900msec: The door unlock pulse will be set
to 900m seconds.
3sec: The door unlock pulse will be set
to 3 seconds.
Double: The door unlock pulse will be set
to 750m seconds is ON
→
250m
seconds is OFF
→
750m seconds
is ON.
10 sec: The system will passively arm 10
seconds after the last door or
hood/trunk is closed.
30 sec: The system will passively arm 30
seconds after the last door or
hood/trunk is closed.
Short: The Pre-Warn chirp sounds like
regular arm/disarm chirps.
Long: The Pre-Warn chirp is extended
and longer.
Constant: The alarming output will stay on
constantly when the system is
tripped or panicked for the
duration of the alarm cycle.
Pulsed: The alarming output will pulse on
and off when the system is tripped
or panicked for the duration of the
alarm cycle.
Constant: The alarming output will stay on
constantly when the system is
tripped or panicked for the
duration of the warning cycle.
Pulsed: The alarming output will pulse on
and off when the system is tripped
or panicked for the duration of the
warning cycle.
11.Door Unlock Pulse (700msec/900msec/
3sec/Double)
Impulsion de déverrouillage de porte
(700msec/900msec/3sec/Double)
Pulso de desbloqueo de puertas
(700mseg./900mseg./3seg./Doble)
12.Exit Delay (10 sec/30sec)
Délai de sortie (10 sec/30 sec)
Retardo de salida (10 seg./30 seg.)
13.Chirp (Pre-Warn) (Short/Long)
Signal sonore (préavertissement)
(Court/Long)
Sonido (Prealarma) (Corto/Largo)
14.Alarm Output Select (Constant/Pulsed)
Sélection de sortie d'alarme
(Constante/Pulsée)
Selección de salida de alarma
(Constante/Pulsada)
15.Warning output (Constant/Pulsed)
Sortie d’alarme (Constante/Pulsée)
Salida de advertencia (Constante/
Pulsada)