Alpine SEA-8081 - Manual (Page 142)

142
English
English/Français/Español
EXT Setup
Programmable Features
1 sec: Pressing MODE button sends an
output for 1 sec.
Cont: Pressing and holding the MODE
button will transmit as long as the
button is held down.
Latched: Pressing MODE button enables
the output until disabled when the
button is pressed again.
1 sec: Pressing MODE button sends an
output for 1 second.
Disable: The impact and ignition sensors
will not be disabled for 20 minutes
when the EXT-1 output is
activated.
Enable: The impact and ignition sensors
will be disabled for 20 minutes
when the EXT-1 output is
activated. This feature is designed
to allow the connection of a
remote engine starter to the
system.
Disable: If a trunk release is used in
conjunction with an EXT output,
the trunk sensor will be triggered
when the EXT is activated.
Enable: The hood/trunk sensor input will
automatically be bypassed if an
EXT is used as a trunk release
output.
6. Ext-6 to Ext-11 (1 sec/Cont)
Ext-6 to Ext-11 (1 sec/Cont)
Ext-6 to Ext-11 (1 seg./Cont)
7. Ext-12 (Latched/1sec)
Ext-12 (Enclenché/1sec)
Ext-12 (Bloqueado/1seg.)
8. EXT-1 Impact Disable (Disable/Enable)
Désactivation d'impact de EXT-1
(Désactivée/Activée)
Inhabilitador de impacto de EXT-1
(Desactivado/Activado)
9. Trunk Sensor Cancel (Disable/Enable)
Annulation du détecteur du coffre
(Désactivée/Activée)
Anulación del detector del maletero
(Desactivada/Activada)