Alpine SEA-8081 - Manual (Page 14)

14
English
Basic Operation
Remote Control
Transmitter
Two Five-Button Remote Control Transmit-
ters (part number SEC-8463) are provided
with the SEC-8063 Security System. The
SEC-8463 Remote Control allows the
arming, disarming, panicking, and EXT
activation of the SEC-8063 Security System
from a remote location. In addition, the SEC-
8463 will also allow you to control a second
security system.
Following is a brief description of the
functions of each of the components of the
remote control transmitter:
1 LED indicator
The three-color LED will illuminate when
the signal is being transmitted.
2 TX/PANIC button
Press this button to:
1. Arm and Disarm the system.
2. Panic the system.
3 EXT1/VALET button
Press this button to:
1. Activate the EXT-1 output.
2. Place the system in Valet mode.
4 EXT2/EXT3 button
Press this button to:
1. Activate the EXT-2 output.
2. Activate the EXT-3 output.
5 EXT4 button
Press this button to:
Activate the EXT-4 output.
6 MODE Button then TX Button
Press the MODE button followed by the
TX button (within 5 seconds) to silently
Arm and Disarm the system.
Notes:
•
Consult your Alpine dealer to determine if
your second security system is compatible
for two car operation.
• Do not expose to rain or water.
• Do not drop or apply shock.
TX
PANIC
EXT 4
EXT 2
EXT 3
EXT 1
VALET