CatEye PW-TR100 Power Unit - Manual (Page 21)

21
PW-TR100 : POWER UNIT
Start Guide
START/STOP/ENTER
LAP
START/STOP/ENTER
LAP
MODE- 2
MODE- 2
START/STOP/ENTER
LAP
Lap
When the LAP button is pressed during main measurement, the measured data between points (lap time/
interval average speed, split time / interval total distance, interval average heart rate, interval average
cadence, interval average power) as well as the lap number are recorded up to a maximum of 199 points.
Recorded lap data can be recalled on the lap viewing screen. (See page 30.)
Backlight
Pressing the LIGHT button illuminates the displays for about three seconds.
Second measurement
The second measurement is another measuring method, different from the main measurement described
on page 19.
A second elapsed time, trip distance, and average speed can be recorded independently of the main mea-
surement.
• How to switch to the second measurement:
When the MODE-2 button is pressed for two seconds, Display-5 switches to the second measurement screen
with the elapsed time “TM-2” displayed on the top and the trip distance “DST-2” displayed at the bottom.
Each press on the MODE-2 button switches the bottom display between the elapsed distance DST-2 and
the average speed AVS-2.
When the MODE-2 button is pressed for two seconds, the system returns to the main measurement.
LAP button
LIGHT button
• Starting / stopping the second measurement
With the second measurement icon illuminated, press the START/STOP/ENTER button to start or stop
measurement.
START/STOP/ENTER button
Main
measurement
Second
measurement
(2 sec.)
..... Second measurement icon