Pc link, Pc link / 50, Menu screen – CatEye PW-TR100 Power Unit User Manual
Page 50: Operation guide
MODE-
1
MODE-
2
MODE-
2
MODE-
1
50
PW-TR100 : POWER UNIT
Defining remote button setting
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
S/S/E
S/S/E
MODE-
1
or
MODE-
2
PC Link
This menu is available when the power unit is connected to the PC.
NOTE:
• Before establishing a PC Link, install the “e-Train data Ver.3” software from the accompanying
CD-ROM on your PC.
For information on software installation on the PC and corresponding operation procedures,
refer to “Install e-Train Data Ver.3” and “OPERATING e-Train Data Ver.3” in the electronic “e-
Train Data v3E. pdf” documentation.
• Measured data other than the power-related data can be downloaded using the download kit.
• PC Online
Once the measured data are downloaded to the PC, the main unit settings changed via the
software are uploaded to the main unit.
NOTE:
For further information, refer to “DOWNLOADING DATA” in the electronic “e-Train
Data v3E. pdf” documentation.
• Online power measurement
When the bicycle on the roller stand or trainer is connected directly to the PC, torque is mea-
sured per 1/100 second. Real-time changes in torque are shown graphically on the PC.
NOTE:
For further information, refer to “ON-LINE MEASUREMENT” in the electronic “e-
Train Data v3E.pdf” documentation.
OFF-Power: The online torque measurement screen does not appear.
Connect to the computer
If the computer is not
properly connected, an er-
ror message is displayed
for 3 seconds and the
menu screen will reappear.
PC link menu
screen
Click
DOWNLOAD
button of download
software to begin
downloading
Cancel
Switch
Online power measurement
Data storage menu screen
Power menu screen or
Power select menu screen
After 10
seconds
Communication on standby
When downloading is completed,
the PC Link menu screen
reappears automatically.