CatEye PW-TR100 Power Unit - Manual (Page 28)

28
PW-TR100 : POWER UNIT
Operation Guide
60 80 100 120 140 160 180 200
bpm
Heart rate
Zone.1
100 - 120 bpm Zone.1
Zone.2
120 - 140 bpm Zone.2
Zone.3
140 - 160 bpm
Zone.3
Zone.4
160 - 180 bpm
Zone.4
Target training zone
Heart rate zone
Target alert setting
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
Functions of main unit
Heart rate zone / Cadence zone
You can set target heart rate and cadence zones and view the time in zone data at any time.
The zone value will flash when the target zones are on and the value is out of your target zone. An alarm will
sound if the sound feature is turned on.
Heart rate zone alert
Four heart rate zones can be set with range and target. The range of each zone may overlap.
The zone value will flash when the target zones are on and the value is out of your target zone. An alarm will
also sound if the sound feature is turned on.
You can check the time in and out of the heart rate zones, set the target and change the range in “Heart rate
zone (page 43)” on the menu screen for each zone.
Cadence zone alert
YW100 has one cadence zone besides the four heart rate zones.
The zone value will flash when the target zones are on and the value is out of your target zone. An alarm will
also sound if the sound feature is turned on. You can check the time in the cadence zone, set the target and
change the range in “Cadence zone (page 41)” on the menu screen.
NOTE: When both the heart rate and the cadence are turned on and go out of the respective zones, the
heart rate and cadence values flash.
For example, if your target is 140 to 160
bpm, turn on the target in Zone 3 as
shown at right.
If the heart rate goes out of this range
during measurement, the heart rate on
Display-2 flashes.
Heart rate zone alert
Cadence zone alert
Alert when both heart rate and ca-
dence go out of respective zones