CatEye PW-TR100 Power Unit - Manual (Page 49)

MODE- 1
MODE- 2
MODE- 2 MODE- 1
49
PW-TR100 : POWER UNIT
Power select
Wheel selection
Tire circumference input
Auto-mode
Sound
Date
Setting clock
Manual odometer input
Speed unit
Defining remote button setting
Cadence zone
Heart rate zone
Heart rate sensor ID
Data file
Data storage
PC Link
Torque
Power select
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
MODE- 1 S/S/E
S/S/E
On
OFF
MODE- 2
5
10
30
1
MODE- 2
#
!
MODE- 2
On
OFF
MODE- 2
Data storage
You can select the recording interval and turn the data storage on or off.
For data storage function, see “data storage function” on page 32.
NOTE: • Before selecting recording interval or turning data storage on or off, it is necessary to stop the
measurement and reset all measured data.
• Not resetting all measured data causes the “PLEASE rESEt” message to be displayed, making
selection impossible.
1 second intervals: ... Maximum 5 hours
5 seconds: ............... Max. 25 hours
10 seconds: ............. Max. 50 hours
30 seconds: ............. Max. 150 hours
• Turning data storage on/off
When data storage is on, data files can be created, and the icon on the main display will light up.
NOTE: • When the remaining memory is 0%, or 99 files have already been stored, further
data storage cannot be performed.
• When the remaining memory indicates 0% while the data storage is in progress, a
data file is created at that point. Measurement after that is switched to the regular
measurement from the data storage. When the regular measurement is performed
even though the data storage is turned on, the
icon flashes.
Data file menu screen
PC link menu screen
Select recording interval Turn data storage on or off
Data storage
menu screen
Memory recording interval
Select
• Selecting recording interval
Specify the interval of memory recording in seconds.
Display 1 indicates the timing in seconds, and Display-5 indicates how much data can be stored
with the remaining memory, in the specified memory interval.
The maximum data storage times are listed below with their respective intervals:
Remaining
hours of storage
available
Data storage(On/Off)