CatEye PW-TR100 Power Unit - Manual (Page 34)

34
PW-TR100 : POWER UNIT
Operation Guide
START/STOP/ENTER
LAP
MENU
MODE- 2
Torque Measurement function
Use the Torque Measurement function to measure and record torque per 1/100 second.
The measured data are saved to the memory in the power unit. This function consumes a large amount of
memory as data are recorded per 1/100 second.
• Switching to Torque Measurement
Press the MENU button with the Measuring screen displayed. Then press the MODE-2 button to bring
up the “Torque measurement” menu screen.
NOTE: Before carrying out torque measurement, set the data storage option to ON.
The torque measurement data are recorded to a data file in the same way as data are
stored. Therefore, the torque measurement menu is not displayed when the data storage
option is OFF.
OFF-Power: The torque measurement screen does not appear.
• Starting / stopping torque measurement
Press the START/STOP/ENTER button when the torque measurement icon is lit to start or stop the
torque measurement per 1/100 second.
Main display Torque menu
screen
Power select
menu screen
START/STOP/ENTER button
NOTE: • The measured data are stored to the memory in the power unit. When the remaining memory
is 100%, measurement can be carried out for at least 30 minutes.
• If the message “Full” appears and measurement stops, this means that there is no remaining
memory. Check the old data files and delete unnecessary files to free up memory, referring
to “Data files” on page 47.