CatEye PW-TR100 Power Unit - Manual (Page 33)

33
PW-TR100 : POWER UNIT
Operation Guide
PC Link
When the power unit is connected to the PC, PC Link is available for data communication between the
power unit and PC.
Press the MENU button with the Measuring screen displayed. Then press the MODE-2 button as many
times as necessary to bring up the “PC Link” menu screen.
NOTE: • Before establishing a PC Link, install the “e-Train data Ver.3” software from the accompanying
CD-ROM on your PC.
For information on software installation to the PC, refer to “Installing e-Train data Ver.3” in the
electronic “e-Train Data v3E. pdf” documentation.
• Measured data other than the power-related data can be downloaded using the download kit.
PC Online
The measured data recorded using the “data storage function” on the previous page are downloaded to the
PC via PC Online.
1. Connect the power unit to the PC.
2. Download the measured data.
3. Launch e-Train Data Ver.3.
Online Torque Measurement
When the bicycle on the roller stand or trainer is connected to the PC using the cable, Online Torque
Measurement is possible. Use this function to measure torque per 1/100 second and to display the torque
distribution graph on the PC screen in real time.
The measured data are saved to the PC.
NOTE: For further information on these or other operations, refer to “Online Measurement” in the
electronic “e-Train Data v3E.pdf” documentation.
OFF-Power: Online Torque Measurement is not possible.
Refer to “Connecting to the PC” in the electronic “e-Train
Data v3E.pdf” documentation.
Refer to “Downloading measured data” in the electronic
“e-Train Data v3E. pdf” documentation.
Refer to “Basic operations of e-Train Data ver.3” in the
electronic “e-Train Data v3E. pdf” documentation.