AMD Geode SC1201 - Manual (Page 98)

98 AMD Geode™ SC1200/SC1201 Processor Data Book
SuperI/O Module 32579B
5.4.2 Logical Device Control and Configuration
As described in Section 5.3.2 "Banked Logical Device Reg-
isters" on page 92, each functional block is associated with
a Logical Device Number (LDN). This section provides the
register descriptions for each LDN.
The register descriptions in this subsection use the follow-
ing abbreviations for Type:
• R/W = Read/Write
• R = Read from a specific address returns the
value of a specific register. Write to the
same address is to a different register.
• W = Write
• RO = Read Only
• R/W1C = Read/Write 1 to Clear. Writing 1 to a bit
clears it to 0. Writing 0 has no effect.
5.4.2.1 LDN 00h - Real-Time Clock
Table 5-6 lists the registers which are relevant to configura-
tion of the Real-Time Clock (RTC). Only the last registers
(F0h-F3h) are described here (Table 5-7). See Table 5-3
"Standard Configuration Registers" on page 95 for descrip-
tions of the other registers.
Table 5-6. Relevant RTC Configuration Registers
Index Type Configuration Register or Action
Reset
Value
30h R/W
Activate. When bit 0 is cleared, the registers of this logical device are not accessible.
1 00h
60h R/W Standard Base Address MSB register. Bits [7:3] (for A[15:11]) are RO, 00000b. 00h
61h R/W Standard Base Address LSB register. Bit 0 (for A0) is RO, 0b. 70h
62h R/W Extended Base Address MSB register. Bits [7:3] (for A[15:11]) are RO, 00000b. 00h
63h R/W Extended Base Address LSB register. Bit 0 (for A0) is RO, 0b. 72h
70h R/W Interrupt Number. 08h
71h R/W Interrupt Type. Bit 1 is R/W; other bits are RO. 00h
74h RO Report no DMA assignment. 04h
75h RO Report no DMA assignment. 04h
F0h R/W RAM Lock register (RLR). 00h
F1h R/W Date of Month Alarm Offset register (DOMAO). Sets index of Date of Month Alarm
register in the standard base address. 00h
F2h R/W Month Alarm Offset register (MONAO). Sets index of Month Alarm register in the
standard base address. 00h
F3h R/W Century Offset register (CENO). Sets index of Century register in the standard base
address. 00h
1. The logical device registers are maintained, and all RTC mechanisms are functional.