Barco E1 - Manual (Page 106)

Driver re-installation, updates or removal
System manual E1 107
Driver re-installation, updates or removal
Reinstalling or updating your BarcoMed Nio driver
Note: These instructions apply to Windows 2000 and Windows
XP.
Important for Windows 2000 or Windows XP users only: If you
previously uninstalled the driver, do NOT allow the Windows Plug
and Play software to reinstall the driver for you.
To reinstall or update only the BarcoMed Nio driver, follow the
steps described in the section “Using the BarcoMed Product
Installation Wizard” with the following changes.
1. Boot your system, and log in using an account with
administrator privileges.
2. Insert your E1 Software CD into your computer’s CD drive. If
the “BarcoMed Product Installation Wizard” doesn’t start
within one minute, browse the contents of your E1 Software
CD and double click on the file: “Setup.exe” to start the
wizard.
The wizard will begin by displaying the screen shown in
figure 49 below.
Figure 49