Color menu, Auto balance, Proceed as follows – Barco E1 User Manual
Page 90: Start niowatch, Open the test patterns dialog, Select the smpte test pattern, When finished, close the test pattern
Advertising
How to use the on-screen display (OSD)
System manual E1
91
Color Menu
Auto Balance
To perform the Auto Balance function, you need to select a
proper test pattern before performing the function.
Proceed as follows:
1. You must have installed the Barco NioWatch software.
2. Start NioWatch.
3. Open the Test Patterns dialog.
4. Select the SMPTE test pattern.
5. Now perform the function Autobalance from the MFGD 1218
control panel.
6. When finished, close the test pattern.
Function
Description
Auto Balance
To automatically adjust the contrast level of
RGB. This does not support resolution of Mac
832 x 624 at 75Hz.
R
To adjust the level of color Red.
G
To adjust the level of color Green.
B
To adjust the level of color Blue.
Main Menu
To return to Main Menu.
Advertising