Barco E1 - Manual (Page 46)

Windows 2000 BarcoMed Nio software installation
System manual E1 47
driver. The wizard will also begin to install the next selected
piece of BarcoMed Software.
If the Wizard failed to successfully install the selected driver,
it will warn you that the installation failed. Click “Finish” to
return to the BarcoMed Product Install Wizard. The wizard
will now begin installing the next selected piece of
BarcoMed Software. Click “Cancel”, then click “Yes” then
click “Finish”. Now “Back” and try reinstalling the driver
following the steps above or using the steps outlined in the
section “Reinstalling or updating your BarcoMed Nio
driver” on page 107.
BarcoMed NioWatch installation
1. Click “Next” on the Welcome Screen of the BARCO NioWatch
InstallShield Wizard (figure 26) to begin the installation or
click “Cancel” to cancel and return to the BarcoMed Product
Install Wizard.
2. After reading the Software License Agreement on the next
screen, click ”Yes“ to continue.
3. Click “Next” on the Choose Destination Location screen to
install the NioWatch software in the default location. Or click
“Browse” to install the software in a different location.
Figure 26