Barco E1 - Manual (Page 92)

How to use the on-screen display (OSD)
System manual E1 93
Input menu: Input Type
*
* This function is not available in DVI input mode.
Function Description
G to Y The Green video signal from the imaging
board is used as luminance value to drive
the RGB subpixels of the panel equally.
RGB to Y The RGB video signals from the imaging
board are calculated and transformed into
a single luminance value according to the
formula 0.3R + 0.59G + 0.11B. This single
luminance signal drives the RGB sub-pix-
els of the panel equally.
Use this setting in case the imaging board
is a color board and if the signal must be
displayed in monochrome.
RGB to RGB The R video signal drives the R sub-pixels,
the G video signal drives the G sub-pixels
and the B video signal drives the B sub-
pixels. This is the preferred setting for
color display controllers.