The equalization option will be available only if, To equalize the displays, Close the application settings dialog – Barco E1 User Manual
Page 82
NioWatch operation
System manual E1
83
Figure 44: Dual-head equalization
The Equalization option will be available only if:
•
the system contains at least one display of the same type as
the one being calibrated
•
at least one of the displays of the same type has already
been calibrated before using a sensor.
To equalize the displays:
1. Be sure the reference display is calibrated to the desired
luminance.
2. Set the Equalization option in the Application Settings dialog.
3. Close the Application Settings dialog.
4. Open the Display Settings dialog and calibrate display (2).
The display will be calibrated and additionally the display
luminance will be matched to the luminance of the reference
display (1).
BARCO
BARCO
c
d
(1) Reference display
(2) Calibrated display: Luminance automatically matched
to reference display