Barco E1 - Manual (Page 30)

Video connection
System manual E1 31
Video connection
The display has 3 different video inputs: VGA (Sub-D 15), Digital
(DVI) and S-Video. However, the S-Video input is not supported.
You can select the proper input by using the display’s on-screen
display.
To connect the video & sync signals:
Figure 9
1. Connect one end of the appropriate video cable to the
corresponding video input of the monitor:
• Analog video: Connect to input (1)
• DVI: Connect to input (2)
The S-Video input is not supported
2. Connect the other end of the video cable to the video output
of your video source:
• Analog video: Computer graphics board with analog video
output
• DVI: Computer graphics board with digital video output
BARCO
d c