Barco E1 - Manual (Page 109)

Driver re-installation, updates or removal
110 System manual E1
Figure 52
6. Click “Next”.
7. If you installed your driver with DualView enabled, skip to
step 8.
If you installed your driver with DualView disabled, click
“Next” to continue. Then click “Finish” to complete the
uninstall process. Click “Finish” again to exit the wizard.
Click “Yes” if Windows tells you that “you must restart your
computer before the new setting will take effect”.
8. If you have installed your driver in DualView mode the
wizard will warn you that you must first disable DualView by
rebooting and then run the uninstall program again.
Figure 53
Click “OK” to continue.
9. Click “Reboot” to disable DualView, click “Finish” to exit the
wizard and then click “Yes” to reboot your system.