I.link related messages – Pioneer VSA-AX10 User Manual

Page 104

Advertising
background image

104

En

Techno Tidbits & Problem-solving

i.LINK Related Messages

BUS FULL

The i.LINK bus has reached its capacity and can-
not transmit any more data.

CANNOT LINK 1

The interface between the amplifier and the se-
lected i.LINK-equipped component is unstable. If
the i.LINK cables appear to be connected prop-
erly and both the amplifier and i.LINK-equipped
component are on, switch the amplifier and the
component off and on again to reestablish the
interface between them.

CANNOT LINK 2

The amplifier can’t identify the selected i.LINK-
equipped component. For example, the amplifier
may not be able to identify an i.LINK-equipped
personal computer.

LINK CHECK

The amplifier is checking the i.LINK network. It
does this, for example, when components are
added or removed from the network. The sound
may be interrupted if this happens during play-
back.

LOOP CONNECT

The i.LINK network cannot function because it is
connected in a loop. Break the loop (see p.31).

NO NAME

NO NAME is displayed instead of an i.LINK-
equipped component name. The component has
no name.

NO SIGNAL

A component is outputting an i.LINK signal that
the amplifier that cannot reproduce. This amplifier
can reproduce signals from i.LINK-Audio-
equipped components (see p.30-31).

PQLS OFF

Displayed when PQLS turns off during playback.
The sound may be interrupted momentarily when
this happens.

PQLS ON

Displayed when PQLS turns on during playback.
The sound may be interrupted momentarily when
this happens.

UNKNOWN

UNKNOWN is displayed instead of an i.LINK-
equipped component name. The name of the
component isn’t recognized.

You may see the following messages displayed in the front panel display when using the i.LINK interface.

This product complies with the following i.LINK
interface specifications:

1) IEEE Std 1394a-2000, Standard for a High
Performance Serial Bus
2) Audio and Music Data Transmission Protocol
2.0

Following the standard for AM824 sequence
adaptation layers, the product is compatible
with IEC60958 bitstream, DVD-A and SACD
media.

Advertising