Pioneer VSA-AX10 - Manual (Page 97)

97
En
Advanced Setup
EXPER
T
Follow steps 1-4 on page 96, if necessary, to get to the
starting point mentioned here.
1 SB SP POSITION should be selected
if it isn’t use the
5∞ buttons to
select it. Press ENTER.
2 Use the
2 3 buttons to select 0.0–
0.3 m, <0.3–1.2 m or 1.2 m<.
3 Use the
5∞ buttons to select
RETURN and press ENTER.
4 To finish THX AUDIO SETUP use the
5∞ buttons to select RETURN and
press ENTER. Then use the
5∞
buttons to select EXIT and press
ENTER.
Surround Back Speaker Position
This setting has been specifically designed to set the distance between your surround back speakers, If you
don't have surround back speakers, or just have one, you won't be able to select this setting. The Advanced
Speaker Array (ASA) system was developed with the principles of THX Ultra2 technology in order to get
optimum sound from your surround back speakers. You choose whether your speakers are 0.0–0.3 m apart
(setting them together is best for ASA), 0.3–1.2 m apart or more than 1.2 m apart
. For more information
about ASA see page 101 and for more information on THX speaker placement see p.103.
4.THX Audio Setup
[ 1.Ultra2 SW Setup ]
[
2.SB SP Position ]
[Return]
4.3. SB SP Position
SB L - SB R
[ <0.3 – 1.2 m ]
[Return]
SB L SB R
4.3. SB SP Position
SB L - SB R
[ 0.0 – 0.3 m ]
[Return]
SB L SB R
SB L SB R
4.3. SB SP Position
SB L - SB R
[ 1.2 m< ]
[ Return ]
1
2
3
ENTER
STANDBY/ON
5˜∞˜2˜3˜ENTER buttons