Quick st ar t guide, Quick start guide part2 – Pioneer VSA-AX10 User Manual

Page 15

Advertising
background image

15

En

QUICK ST

AR
T GUIDE

Quick Start Guide Part2

10

Auto Surround Setup

Please Wait


Caution!!

Test tone is

output loudly.

[

Cancel

]

Auto Surround Setup

•Connect microphone
•Please be quiet
•Move obstacles away
•If you have a subwoofer

turn power on and

turn volume up

[

Start

]

[Cancel]

Auto Surround Setup

Now Analyzing

•••

Environment Check

Ambient Noise

[OK]

Microphone

[OK]

Speaker Level

[

OK

]

[

Cancel

]

\

\

5 Press AMP then press the SUB button

on the remote control.

6 Press the SYSTEM SETUP button and

use the on-screen display (OSD) that
appears on your TV.

7 The arrow should be pointing at AUTO

SURROUND SETUP, press ENTER.

8 NORMAL SURROUND should be

selected. (Use the

23 buttons to select

it if it isn't.) Use the

5∞ buttons to

select GO NEXT and press ENTER.

For FRONT BI-AMP 5.1 settings see page 73.

RETURN brings you back to the system setup menu.

9 Some auto setup instructions will be

listed, make sure to follow them.

Make sure you have: hooked up the microphone and
moved obstacles to the speakers out of the way. If you
have a subwoofer make sure it is turned on and has the
volume turned up.

WARNING: The test tones are very loud!! Make sure
there are no infants or small children in the room and
that no one who will be scared, upset or injured by loud
noise is present. You yourself may want to wear ear-
plugs. If you lower the volume of test tones with the
master volume, the result will likely be incorrect speaker
settings.

10 If you have followed all setup

instructions and warnings above make
sure that the arrow is pointed to
START and press ENTER. Be prepared
for loud test tones.

Try to be as quiet as possible after hitting ENTER. The
test tones may take up to 30 seconds.

The volume automatically increases to 0dB, then the
system will output some test tones and establish
ambient noise levels, the microphone status, and what
speakers you hooked up.

\

5

5

6

7

STATUS

SPEAKER

A/B

LOUDNESS

INPUT

ATT.

Amplifier

MAIN

SUB

SIGNAL

SELECT

TAPE 2

MONITOR

SYSTEM

SETUP

DISPLAY

DIMMER

VIDEO

SELECT

EFFECT/

CH SEL.

BASS/

ATREBLE

TONE

AMP

DVD/LD

VCR1
/DVR

VCR2

VCR3

TV

REMOTE

SETUP

CD-R/

TAPE1

CD

TUNER

VIDEO

SAT

TV

CONTROL

System Setup

[

Auto Surround Setup

]

[1. Input Assign]
[2. Surround Setup]
[3. Expert Setup]
[4. THX Audio Setup]

[Exit]

8

Auto Surround Setup

Speaker System Select

[

Normal Surround

]

[Go Next]
[Return]

Advertising