Pioneer VSA-AX10 - Manual (Page 84)

84
En
Using Other Functions
Resetting the Remote Control
The following operations allow you to erase the settings stored in the remote control.
1 Hold down both the STANDBY/
ON button and MUTING button and
then push the RESET tab under the
battery cover on the back of the
remote control.
2 Release the reset tab and then
release the two buttons.
If you don't release them in this order the settings
won't be cleared.
All the settings will be reset to the default set-
tings.
MUTING STANDBY/ON
RESET tab
+
ENTER
VCR2 TV CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION STANDBY/ON
–
VOL –
FUNCTION
Resetting the Main Unit
The following operations allow you to erase the settings stored in the main unit.
1 From the Standby mode, and while
holding down the DIGITAL NR
button press the STANDBY/ON
button for about three seconds.
2 When you see RESET? appear in the
display, press the TONE – button.
OK? appears in the display, press
TONE +.
All the settings, including the speaker, surround
sound settings and tuner settings will be reset to
the default settings.
1 1
2 2
memo
memo