Pioneer LX03 - Manual (Page 31)

Listening to your system 05
31
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
3 Select the desired Bass Mode
setting, then press ENTER to confirm.
Select between Off, Music, Cinema or Auto.
• When Bass Mode is set to Auto, the
setting (Music or Cinema) is selected
automatically to optimally match the audio
signal.
• The BASS MODE indicator lights when
Bass Mode is active.
Adjusting sound delay
Some monitors have a slight delay when
showing video, so the soundtrack will be
slightly out of sync with the picture. By adding
a bit of delay, you can adjust the sound to
match the presentation of the video.
There are a total of 60 steps (levels) that you
can adjust, with a total range of 200 msec.
1 Press to open the sound menu.
2 Select ‘Sound Delay’ then press
ENTER.
3 Select the length of the delay in
sound, then press ENTER to confirm.
• This option is deactivated and not
displayed if you have Auto Delay set to On
in HDMI Setup (see Setting the Auto Delay
on page 64).
ENTER
SOUND
ENTER
ENTER
LX03_En.book 31 ページ ２００８年６月２４日 火曜日 午後６時１分