Pioneer LX03 - Manual (Page 37)

Disc playback features 06
37
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Creating a program list
This feature lets you program the play order of
titles/chapters/groups/tracks on a disc.
1
1 During playback, select
‘Play Mode’.
2 Select ‘Program’ then select ‘Create/Edit’
from the list of program options.
3 Select a title, chapter or track for
the current step in the program list.
• For a DVD disc, you can add a title or a
chapter.
• For a DVD-Audio disc, you can add a whole
group, or a track within a group to the
program list.
• For a CD, SACD or Video CD/Super VCD,
select a track to add to the program list.
After pressing ENTER to select the title/
chapter/track, the step number automatically
moves down one.
4 Repeat step 3 to build up a program list.
A program list can contain up to 24 steps.
• You can insert steps by just highlighting
the position where you want the new step
to appear and entering a title/chapter/
group/track number.
• To delete a step, highlight it and press
CLEAR.
5 Play the program list.
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off.
Tip
• Use the following controls during program
play:
Other functions available from the
program menu
There are a number of other options in the
program menu in addition to Create/Edit.
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program list
and turns off program play
Note
1 You can’t use program play with VR format DVD-R/-RW discs, Video CD/Super VCDs playing in PBC mode, WMA/MP3/MPEG-
4 AAC discs, DivX video/WMV discs, or while a DVD disc menu is being displayed.
HOME MENU
ENTER
ENTER
Button What it does
Save the program list and exit
without starting playback.
Skip to the next step in the
program list.
HOME MENU
LX03_En.book 37 ページ ２００８年６月２４日 火曜日 午後６時１分