Pioneer LX03 - Manual (Page 45)

Listening to the radio 08
45
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Chapter 8
Listening to the radio
Listening to the radio
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen.
1 Switch to the tuner, then press
repeatedly to select the FM or AM band.
The display shows the band and frequency.
2 Tune to a frequency.
There are three tuning modes — manual, auto,
and high-speed:
• Manual tuning – Press TUNE +/–
repeatedly to change the displayed
frequency.
• Auto tuning – Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
• High-speed tuning – Press and hold
TUNE +/– until the frequency display starts
to move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Press after tuning to an FM radio
station.
2 Select ‘Tuner Setup’ then press
ENTER.
3 Choose ‘FM Auto/Mono’ then
press ENTER.
4 Select ‘FM Mono’ then press
ENTER.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select FM Auto above to switch back to auto-
stereo mode (the stereo indicator (
) lights
when receiving a stereo broadcast).
Improving poor AM sound
The simplest way to improve the sound quality
of AM radio is to make sure that the TV in the
room is switched off. Also try changing the
position and direction of the AM loop antenna.
FM/AM
TUNER
TUNE
TUNE
SETUP
ENTER
ENTER
ENTER
LX03_En.book 45 ページ ２００８年６月２４日 火曜日 午後６時１分