Pioneer LX03 - Manual (Page 83)

Additional information 14
83
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Front panel display messages
Message Description
192kHz PCM An operation is prohibited because the source is 176.4 kHz/192 kHz PCM.
2ch Only An operation is prohibited because it is only applicable to 2 channel sources, while
the current source is a multichannel source.
96kHz PCM An operation is prohibited because the source is 88.2 kHz/96 kHz PCM.
Error MIC! An error occurred during MCACC setup because the microphone is not connected
or is not connected properly.
Error Speaker! An error occurred during MCACC setup because the speakers are not connected or
are not connected properly.
Exit Appears when a menu is automatically exited after a set period of inactivity.
HDMI Audio <TV> Displays when you change the listening mode, the volume level, or some sound
settings when the
HDMI Audio is set to TV.
HDMI C.ERR 1** Check if the HDMI cable is properly connected. If the cable is properly connected,
this unit may be damaged. In such an event, please contact a Pioneer-authorized
service center or your nearest dealer.
HDCP ERROR Check whether or not the connected component is compatible with HDCP. If it is not
compatible with HDCP, reconnect the source device using a different type of
connection (SCART or composite). Some components that are compatible with
HDCP still cause this message to be displayed, but so long as there is no problem
with displaying video, this is not a malfunction.
Key Lock The key lock is enabled. See Key lock setting on page 70.
Line Out Mode Operation is disabled since Line Output is set to Lt/Rt.
Muting When audio is muted, display appears if Auto MCACC setup is performed.
No MIC Display appears when Auto MCACC setup is performed without a microphone
connected.
Noisy! Background noise is too high to complete MCACC setup successfully.
Not support For HDMI1 or 2 inputs:
Try adjusting the resolution, DeepColor or other setting for your component.
For DVD input:
Try changing the resolution in the HDMI Resolution setting (page 54).
OC Error1
OC Error2 Check whether the speaker cables are short-circuited. If the error message continues
to be displayed, contact your Pioneer authorized service center or your dealer for
servicing.
Over Temp Try lowering the volume. If this problem is not fixed by removing and inserting the
power cable, this unit may be damaged. In such an event, please contact a Pioneer-
authorized service center or your nearest dealer.
Phones In An operation is prohibited because the headphones are connected.
Tray Lock The tray lock is on (see page 80).
USB Error See Important on page 43 for more on this.
*** BackUpERR Contact your Pioneer authorized service center or your dealer for servicing.
LX03_En.book 83 ページ ２００８年６月２４日 火曜日 午後６時１分