Pioneer LX03 - Manual (Page 67)

HDMI Control 13
67
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Setting the HDMI options
You must adjust the settings of this unit as well
as HDMI Control-compatible connected
components in order to make use of the HDMI
Control function. For more information see the
operating instructions for each component.
Setting the HDMI Control mode
Choose whether to set this unit’s HDMI Control
function On or Off. You will need to set it to
Control On to use the HDMI Control function.
• When using a TV not manufactured by
Pioneer, put this setting to Control Off.
1 Press SETUP.
2 Select ‘HDMI Setup’ then press
ENTER.
3 Select ‘HDMI Ctrl’, then press
ENTER.
4 Adjust the setting then press
ENTER to confirm.
• Control On – Enables the HDMI Control
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the HDMI Control
function, the audio and video output from
the HDMI connection are output from the
flat screen TV.
• Control Off – The HDMI Control is
disabled. Synchronized operations cannot
be used. When this unit’s power is turned
off, audio and video of sources connected
via HDMI are not output.
Before using synchronization
Once you have finished all connections and
settings, you must:
1 Put all components into standby mode.
2 Turn the power ON for all components,
with the power for the flat screen TV being
turned on last.
3 Choose the HDMI input to which the TV is
connected to this unit, and see if video
output from connected components displays
properly on the screen or not.
SETUP
ENTER
ENTER
ENTER
LX03_En.book 67 ページ ２００８年６月２４日 火曜日 午後６時１分