Using the initial settings menu, Video output settings, Initial settings menu – Pioneer LX03 User Manual
Page 53: Initial settings menu 11, Chapter 11
Initial Settings menu
11
53
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Chapter 11
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press DVD.
2
With playback stopped, press to
display the Home Menu.
3
Select ‘Initial Settings’.
4
Select the setting and option you
want to set.
All the settings and options are explained on
the following pages.
1
Video Output settings
CD
DVD
HOME MENU
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
•
The
AV Connector Out setting only needs to be set if you have connected this unit to your TV using a SCART cable.
ENTER
Initial Settings
ENTER
Setting
Option
What it means
TV Screen
(See also Screen sizes
and disc formats on
page 77.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
16:9 (Compressed)
Can be selected when the HDMI Resolution is set to 1920 x
1080p, 1920 x 1080i or 1280 x 720p. Video in 4:3 can be
properly displayed on a 16:9 high definition television (with
black bars shown on either side of the screen).
AV Connector Out
(See Connecting
auxiliary components on
page 59.)
Video
Ordinary (composite) video output, compatible with all TVs.
S-Video
Almost the same quality as RGB, but can give better results if
you are using a long SCART cable.
RGB
If your TV is compatible, this setting gives the best picture
quality.
LX03_En.book 53 ページ ２００８年６月２４日 火曜日 午後６時１分