Introduction of advanced tuner, Operation 17, Storing and recalling broadcast – Pioneer DVH-P5000MP User Manual

Page 17: Frequencies 17, Tuning in strong signals 17, Introduction of advanced tuner operation, Storing and recalling broadcast frequencies, Tuning in strong signals, Tuner

Advertising
background image

Introduction of advanced

tuner operation

1

2

1 Function display

Shows the function status.

2 LOC indicator

Shows when local seek tuning is on.

% Press F to display the function names.

Press F repeatedly to switch between the fol-

lowing functions:

BSM (best stations memory)REG (regional)

LOCAL (local seek tuning)program type

selection (PTY)TA (traffic announcement

standby)AF (alternative frequencies search)

NEWS (news program interruption)

# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or LOCAL.

Note

If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.

Storing and recalling

broadcast frequencies

If you press any of the NUMBER (16) you can

easily store up to six broadcast frequencies for

later recall with the touch of a button.

% When you find a frequency that you

want to store in memory press a NUMBER

(16) and hold until the preset number

stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same NUMBER

(16) the radio station frequency is recalled

from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 MW/LW stations can be
stored in memory.

! You can also use q and r to recall radio

station frequencies assigned to NUMBER
(16).

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press F to select LOCAL.

Press F until LOCAL appears in the display.

2 Press r to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

3 Press m or n to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: LOCAL 1LOCAL 2LOCAL 3

LOCAL 4

MW/LW: LOCAL 1LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Tuner

En

17

English

Section

05

Advertising