Pioneer DVH-P5000MP - Manual (Page 80)

Setting the level indicator
These are two stored level indicator to select
from.
% Press EQ and hold to select the level in-
dicator.
Press EQ and hold repeatedly to switch be-
tween the following settings:
Level indicator 1Level indicator 2Level in-
dicator fullLevel indicator off
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.
Selecting AUX as the source
% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 78.
Setting the AUX title
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press F and hold until TITLE IN ap-
pears in the display.
2 Press r or q to select a letter of the
alphabet.
Each press of r will display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... > [ ] order. Each press of q
will display a letter in the reverse order, such
as Z Y X ... C B A order.
3 Press n to move the cursor to the
next character position.
When the letter you want is displayed, press
n to move the cursor to the next position
and then select the next letter. Press m to
move backwards in the display.
4 Move the cursor to the last position by
pressing n after entering the title.
When you press n one more time, the en-
tered title is stored in memory.
5 Press BAND to return to the playback
display.
Other Functions
En
80
Section
16