Listening a cd, Basic operation of cd, Playing cds – Pioneer DVH-P5000MP User Manual
Page 38
Listening a CD
1
3
4
2
Head units display
1
4
3
When the separately sold display is connected to this
unit, the listed information will appear on it.
Information display
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
1 CD indicator
Shows when a CD is playing.
2 REAR indicator
Shows when the DVD player is operated
from rear seats.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
4 Track number indicator
Shows the track currently playing.
Note
If you set A-PLY: OFF, REAR will be displayed on
the head units display when you insert a disc
into disc loading slot, regardless of whether the
rear display is connected to this unit or not.
Basic operation of CD
1 To perform fast forward or reverse,
press and hold m or n.
2 To skip back or forward to another
track, press o or p.
Pressing p skips to the start of the next
track. Pressing o once skips to the start of
the current track. Pressing again will skip to
the previous track.
# If the remote control is set to DVH mode, o
and p do not operate. In this case, press m
or n.
3 To stop playback, press g.
# When you stop CD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.
Playing CDs
En
38
Section
09