Pioneer DVH-P5000MP - Manual (Page 79)

Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
1 Press F to select TEL.
Press F repeatedly until TEL appears in the dis-
play.
2 Press m or n to switch the tele-
phone muting/attenuation.
Pressing m or n will switch between
TEL :ATT (attenuation) and TEL:MUT (muting)
and that status will be displayed.
# When the multi-channel processor (e.g., DEQ-
P7000) is connected to this unit, you can select in
the following setting:
! TEL:MUT  Muting
! TEL :A20  Attenuation (TEL :A20 has a
stronger effect than TEL :A10)
! TEL :A10  Attenuation
Notes
! The sound is turned off, MUTE or ATT is dis-
played and no audio adjustment is possible.
! Operation returns to normal when the phone
connection is ended.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Press F to select A-PLY.
Press F repeatedly until A-PLY appears in the
display.
2 Press r to turn automatic playback
on.
A-PLY: ON appears in the display.
# Press q to turn automatic playback off.
Correcting distorted sound
This function is effective only when you con-
nected a Pioneer multi-channel processor (DEQ-
P7000) to this unit.
You can minimize distortion likely caused by
the equalizer curve settings.
! Setting an equalizer level high can cause
distortion. If high sound is crippled or dis-
torted, try switching to LOW. Normally,
leave the setting at HI to ensure quality
sound.
1 Press F to select D_ATT.
Press F repeatedly until D_ATT appears in the
display.
2 Press m or n to select LOW or HI.
Pressing m or n will switch between HI
(high) and LOW (low) and that status will be
displayed.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down F until the unit turns off.
Initial Settings
En
79
English
Section
15