Pioneer DVH-P5000MP - Manual (Page 82)

! When announcement support you have se-
lected is supported by the current service
component, < or > is displayed on W A.
Operating announcements
with the function menu
When operating with the m or n at step 2,
indications are displayed in the following
order:
WTHR (Area weather flash)ANNC (An-
nounce)
Notes
! Press TA on the head unit and hold to turn on
NEWS. To turn off NEWS, press TA on the
head unit and hold.
! When ANNC is on, Warning/service, Event an-
nouncement, Special event, Finance, Sports
and Information are also turned on.
Available PTY function
You can select the desired PTY from among
the PTY that can be received. DAB PTY func-
tions are slightly different from RDS PTY func-
tions. Do not confuse DAB PTY functions and
RDS PTY functions.
Searching the PTY
1 Press F to select program type selection
(PTY).
2 Press m or n to select a program
type.
3 Press r to begin the search.
Note
The PTY method displayed is narrow. The wide
method cannot be selected when using DAB as
source.
Using dynamic label
Dynamic label provides character information
concerning the service component youre cur-
rently listening to. You can scroll the displayed
information.
Notes
! The tuner automatically memorizes the three
latest dynamic label received, replacing text
from the least recent reception with new text
when it is received.
! You can store data from up to six dynamic
label transmissions in buttons 16.
Displaying dynamic label
1 Press DISPLAY on the head unit and
hold to display dynamic label.
Dynamic label for the currently broadcasting
station is displayed.
# You can cancel dynamic label display by
pressing DISPLAY on the head unit or BAND.
# When no dynamic label is currently being re-
ceived, NO TEXT is displayed.
2 Press m or n to recall the three
most recent dynamic label.
Pressing m or n switches between the
current and the three dynamic label data dis-
plays.
# If there is no dynamic label data in memory
the display will not change.
3 Press q to scroll the dynamic label.
# When viewing dynamic label, do not operate
until you have parked your car safely.
# If you press r, you return to the first line.
# If you select the dynamic label mode again
after having canceled it, the information may
switch to the latest available.
Other Functions
En
82
Section
16