Connecting up 02, Using other types of video output, English – Pioneer DV-989AVi-S User Manual

Page 15: Connecting using an s-video output, Connecting using the av connector output, Connecting using hdmi, On page 21 for more on this, You can use the s-video output instead of the, Video out, Audio out l/r

Advertising
background image

Connecting up

02

15

En

English

2

Connect the supplied AC power cord

to the AC IN inlet, then plug into a power
outlet.

• Do not unplug the player from the power

outlet while it is switched on.

• Do not plug this player into a switched

power supply found on some amplifiers
and AV receivers.

Using other types of video
output

This player has standard (composite), S-video
and component video outputs, as well as an
HDMI connector (for digital video/audio). The
main difference between them is the quality
of the picture.

S-video delivers a better picture than standard
composite video, while component video
gives better picture quality still. The variety of
outputs also gives you the flexibility of
connecting your particular equipment using
the best connection type available.

HDMI provides highest quality digital video
(and audio) using one simple digital
connection, provided your monitor or display
is also equipped with HDMI. See

Connecting

using HDMI

on page 21 for more on this.

Connecting using an S-Video output

You can use the S-Video output instead of the

VIDEO OUT

jack to connect this player to

your TV (or other equipment).

Use an S-Video cable (not supplied) to

connect the S-VIDEO OUT to an S-Video
input on your TV, monitor or AV receiver.

Line up the small triangle above the jack with
the same mark on the plug before plugging
in.

• If you connect both S-video jacks, but one

of the connected components is not S1/
S2 compatible, the automatic aspect ratio
switching will not work with either
connected component.

Connecting using the AV connector
output

If your TV has a SCART-type AV input, you can
use a SCART cable to connect this player to
your TV. This type of connection carries both
the sound and the picture, so there’s no need
to connect up the

AUDIO OUT L/R

and

VIDEO OUT

jacks.

Use a SCART cable (not supplied) to

connect the AV CONNECTOR 1 (RGB)-TV/
AV Receiver to an AV input on your TV.

CONTROL

IN

OUT

S-VIDEO

OUT

VIDEO

OUT

COMPONENT VIDEO OUT

P

B

P

R

Y

2

1

2

1

AV CONNECTOR 2

AV CONNECTOR 1 (RGB)-TV/AV Receiver

TV

S-VIDEO

INPUT

AV CONNECTOR 1 (RGB)-TV/AV Receiver

AV CONNECTOR 2

OPTICAL

COAXIAL

R

L

R

L

SUB

WOOFER

AUDIO

OUT

(2ch)

CENTER

SURROUND

FRONT

AUDIO OUT

(5.1ch)

DIGITAL AUDIO

OUT

(AUDIO)

HDMI OUT

S400

2

1

2

1

VIDEO

OUT

S-VIDEO

OUT

COMPONENT VIDEO OUT

CONTROL

IN

OUT

P

B

P

R

Y

SCART

TV

DV-989_en.book Page 15 Monday, July 25, 2005 7:37 PM

Advertising