Pioneer DV-989AVi-S - Manual (Page 64)

Initial Settings menu 08
64
En
• This player is compatible with both PAL
and NTSC progressive scan formats.
However, your TV must also be
progressive scan compatible to take
advantage of this feature.
• The RGB setting in AV Connector Out
below will automatically be switched off
when the component video outputs are
set to output progressive-scan video.
AV Connector Out
• Default setting: Video
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
• If you make a setting here that is
incompatible with your TV, the TV may not
display any picture at all. If this happens
either switch everything off and reconnect
to the TV using either the supplied video
cable, or an S-video cable (see
Easy
connections on page 14 and Using other
types of video output on page 15 for more
on this).
• SCART cables come in various
configurations. Make sure you use the
correct one for your TV/monitor. See
page 98 for the SCART pin assignment
diagram.
• Video – Compatible with all TVs, but
lowest quality of the three AV settings.
• S-Video – Almost the same quality as
RGB, but can give better results if you are
using a long SCART cable.
• RGB – If your TV is compatible, this setting
gives the best picture quality.
• When the AV connector is set to output
RGB video, the component video output is
switched off. If you want to use the
component video output (for example, to
watch progressive scan video), set the AV
connector to
Video or S-Video .
S-Video Out
• Default setting: S2
You only need to make this setting if you
connected this player to your TV using an S-
video cable.
If you find that the picture is stretched or
distorted on the default
S2 setting, try
changing it to S1 .
Still Picture
• Default setting: Auto
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
TV Screen
Component Out
AV Connector Out
S-Video Out
Still Picture
Video
S-Video
RGB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
TV Screen
Component Out
AV Connector Out
S-Video Out
Still Picture
S1
S2
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
TV Screen
Component Out
AV Connector Out
S-Video Out
Still Picture
Field
Frame
Auto
Initial Settings
DV-989_en.book Page 64 Monday, July 25, 2005 7:37 PM