Pioneer DV-989AVi-S - Manual (Page 97)

Additional information 09
97
En
English
i.LINK-related messages
You may see the following messages
displayed in the front panel display when
using the i.LINK interface.
LINK CHECK
The player is checking the i.LINK network. It
does this, for example, when components are
added or removed from the network. The
sound may be interrupted if this happens
during playback.
PQLS ON
Displayed when the player receives a rate
control on request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
Note that the PQLS feature works only when
the player is connected to a single receiver.
PQLS OFF
Displayed when the player receives a rate
control off request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
LOOP CONNECT
The i.LINK network cannot function because
it is connected in a loop (see
Creating an
i.LINK network on page 20).
BUS FULL
The i.LINK bus has reached its capacity and
cannot transmit any more data.
• Static electricity or other external
influences may cause malfunctioning of
this unit. In this case, unplug the power
cord and then plug back in. This will
usually reset the unit for proper operation.
If this does not correct the problem,
please consult your nearest Pioneer
service center.
DV-989_en.book Page 97 Monday, July 25, 2005 7:37 PM