Before you start 01, What’s in the box, Putting the batteries in the remote control – Pioneer DV-989AVi-S User Manual

Page 8

Advertising
background image

Before you start

01

8

En

What’s in the box

Please confirm that the following accessories
are in the box when you open it.

• Remote control

• AA/LR6 batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

• 4-pin S400 i.LINK cable

• Power cable

• These operating instructions

• Warranty card

Putting the batteries in the
remote control

1

Open the battery compartment cover

on the back of the remote control.

2

Insert two AA/R6P batteries into the

battery compartment following the
indications (

,

) inside the

compartment.

3

Close the cover.

Incorrect use of batteries can result in
hazards such as leakage and bursting.
Please observe the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,
different batteries may have different
voltages.

• Make sure that the plus and minus ends

of each battery match the indications in
the battery compartment.

• Remove batteries from equipment that

isn’t going to be used for a month or
more.

• When disposing of used batteries, please

comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.

H048 En

Using the remote control

Keep in mind the following when using the
remote control:

• Make sure that there are no obstacles

between the remote and the remote
sensor on the unit.

• The remote has a range of about 7 meters.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.

DV-989_en.book Page 8 Monday, July 25, 2005 7:37 PM

Advertising