Toshiba Magnia 3310 - Manual (Page 108)

Installing and Removing Hardware
CPU module 90
CPU module
The server is classified into 2 models with different CPU clock
speeds (2B GHz, 2.40 GHz and 3.06 GHz). If two processsors are
installed in your server, the system is transformed into an
upgraded version (maximum of 2 CPUs).
Please note that only CPUs with the same clock speeds can be
installed together. There is a socket (socket No. 2 ) for installing an
expansion CPU at the lower side of the socket (socket No. 1) for
the standard CPU.
To install a CPU with a different processing speed, it is necessary
to remove and replace all current CPUs with others with the same
processing speed.
When setting up this server with a single CPU configuration,
mount the CPU on CPU socket1. Mounting a CPU only on
CPU socket2 is not supported.
CPU Socket
CPU socket 2
CPU socket 1
(standard)
(CPU FAN1)
FAN Connector*
FAN Connector
(CPU FAN2)
(Pedestal model) (Rack model)
CPU Socket 2
CPU Socket 1