Toshiba Magnia 3310 - Manual (Page 183)

System Configuration Setup
Onboard SCSI utility
165
Menu configuration
When the SCSI Utility is started, the monitor will enter the follow-
ing main menu display mode:
The server has two onboard SCSI controllers, channel A which is
connected with the built-in hard disk drive and channel B which is
connected with the 5.25” device in a standard configuration (that
is, if no RAID controller is added).
To set the channel A of these two SCSI controllers, select “AIC-
7902 A at...” and to set the channel B select “AIC-7902 B at...”,
and press the <Enter> key. The following main menu screen is
displayed.
If “Configure/View SCSI Controller Settings” is selected, the
onboard SCSI controller settings can be verified or changed.
If “SCSI Disk Utilities” is selected, the onboard SCSI controller
settings can be verified. However, do not change these settings.
Adaptec SCSISelect( TM ) Utility vX.XX
AIC-7902 B at slot XX XX:XX:XX
Arrow keys to move cursor, <Enter> to select option,<Esc> to exit (**default)
Adaptec SCSISelect( TM ) Utility vX.XX
AIC-7902 X at slot XX, XX:XX:XX
Would you like to configure the SCSI controller, or run the
SCSI Disk Utilities? Select the option and press <Enter>.
Options
SCSI Disk Utilities
AIC-7902 A at slot XX XX:XX:XX
Configure/View SCSI Controller Settings