Toshiba Magnia 3310 - Manual (Page 89)

Installing and Removing Hardware
Cooling fan
71
Connectors on the motherboard
11 If expansion cards have been removed, install them according
to the procedure.
See the steps4 and 5 in “Installing the expansion card” on page
132.
12 Fit the panels to the server.
See “Removing and replacing the server panels” on page 25.
13 Connect all the power cables of the server to the power supply,
and switch on the server.
Removing the cooling fan
Before removing the cooling fan, carefully read “Before starting
operation” on page 57, and proceed to the job according to the
following procedure:
CAUTION:
• The server cannot be operated as a standard intake fan
module is removed from it.
• The server cannot be operated as a standard exhaust fan
module is removed from it.
1 If the server is on, shut it down and turn off the power.
FAN1-R
FAN1