Brady 200M User Manual
Page 14
Ribbons and Printhead Wear
CAUTION: Ribbons used in the Brady USA, Inc. Printer
MUST be as wide as or wider than the media. Brady-brand
ribbons provide an extremely smooth backing surface that
protects the printhead from abrasion by the media. If the ribbon
is narrower than the media, areas of the printhead will be
unprotected and subject to premature wear.
Repacking
CAUTION: If shipment of your printer is necessary, carefully
pack the printer in a suitable container to avoid damage during
transit. Whenever possible, use the original container from the
factory. If using a different container, a procedure similar to
the original factory packaging should be followed.
Refer to Chapter 2 for further repacking instructions.
In
tr
o
d
u
ct
io
n
M-Series User s Guide
Introduction
1-5