Brady 200M - Manual (Page 64)

Adjustment” and “ Lower Media Sensor Position Adjustment”
later in this chapter.
Transmissive Media Sensor Positioning Using the Locator
Brady materials require only two distinct upper media sensor
positions. These two positions are shown as position A and
position B in Figure 7.4.
The lower media sensor should not be repositioned when using
Brady media; it should remain at its factory-set position of 0.6"
away from the fire wall at all times.
Figure 7.2 Upper Media Sensor
A
d
ju
st
m
en
ts
M-Series User ’s Guide Adjustments
7-3