Brady 200M - Manual (Page 40)

CANCEL Key Self Test
This self test prints a single label which contains a listing of the
printer’s current configuration parameters stored in Configuration
(EEPROM) Memory. Press the CANCEL key while turning the
AC Power Switch ON. See Figure 3.2.
The configuration may be changed either temporarily (for specific
label formats or ribbon and label stock), or permanently (by saving
the new parameters in EEPROM Memory.) Saving new parameters
occurs whenever a Printer
Calibration procedure is
performed. R efer to the
procedure in Sect ion 4,
Configuration and
Calibration.
Figure 3.2 Cancel Key Test Sample Printout
O
p
er
at
io
n
M-Series User ’s Guide Operation
3-7