Brady 200M - Manual (Page 63)

Black-Mark Media Sensor Position Adjustment
This sensor position requires no adjustment or calibration by the
user.
Transmissive Media Sensor Position Adjustment
The transmissive media sensor senses either the “ web” between
labels or a hole or notch in the media to determine the length of the
label or ticket.
The locator is a device designed to make media sensor positioning
easier and more accurate. The locator minimizes the position the
upper media sensor can maintain. See Figures 7.2 through 7.5. All
Brady media requires an upper media sensor position which can
be attained with the locator in place. The lower media sensor
should remain at its factory-set position 0.6" away from the fire
wall at all times.
Other brands of media may require the locator to be removed. In
those cases, refer to “ Upper Transmissive Media Sensor Position
Figure 7.1 Printhead Pressure Adjustment
Adjustments M-Series User ’s Guide
7-2