Brady 200M - Manual (Page 31)

Fanfold Media
To load fanfold media, place the fanfold media in the bottom or
to the rear of the media compartment and thread it through the
printhead as shown in Figure 2.6. Adjust the media guide using
the thumb screw to keep the media from drifting left or right.
Fanfold media from outside the printer feeds through one of the
two access slots, one at the bottom of the printer and one at the
rear.
Figure 2.6 Fanfold Media Loading Diagrams
260M
200M
Installation M-Series User ’s Guide
2-10