Operation – SkyTrak 6036 Operation Manual User Manual
Page 30
Advertising
24
Model 6036
Operation
Ignition Switch
(Figure 6)
Using the ignition switch key (Figure 6, 1), the switch may be turned
clockwise from the OFF (2) position to the RUN (3) and START (4)
positions. The START position is spring-loaded to return to the RUN
position and must be manually held in place for starting.
OFF (2) position — The entire electrical system is shut down.
RUN (3) position — All controls and indicators are operable.
START (4) position — Engages starter motor to crank the engine when the
parking brake switch is engaged and the transmission is in NEUTRAL.
Figure 6
OT0680
2
3
4
1
Advertising