SkyTrak 6036 Operation Manual - Manual (Page 32)

26 Model 6036
Operation
Park Brake Switch
(Figure 8)
The Parking Brake Switch (Figure 8, 1) has two positions:
ENGAGED ............ toggle switch downward
DISENGAGED ........... toggle switch upward
The Parking Brake Switch (Figure 8, 1) must be ENGAGED to permit
engine starting. A red LED, on the parking brake switch, and a light in the
instrument cluster will indicate the brake is ENGAGED.
The parking brake may be used to stop in an EMERGENCY situation.
However, use caution because the stop will be abrupt and the operator and
the load may be jolted forward unexpectedly.
Figure 8
P
P
OS0121 OS1323
OH1772
1