SkyTrak 8042 Service Manual - Manual (Page 185)

9-3 6036, 6042, 8042, 10042, 10054
Electrical System
9.2 SPECIFICATIONS
Electrical system specifications are listed in Section 2,
“General Information and Specifications.”
9.3 SAFETY INFORMATION
9.4 FUSES AND RELAYS
9.4.1 Engine Compartment
The starter relay (1), one 250 amp fuse (2) and one 200
amp relay (3) for the cold start grid heater (if equipped)
are located inside the engine compartment and are
mounted on a bracket on the left side of the frame rail.
WARNING
DO NOT service the machine without following all
safety precautions as outlined in Section 1, “Safety
Practices,” of this manual.
MAQ0120
3
2
1