JLG 3248RS/10RS Service Manual - Manual (Page 110)

SECTION 5 - JLG CONTROL SYSTEM
5-14 – JLG Lift– 3121273
5.3 MACHINE CONFIGURATION PROGRAMMING INFORMATION
NOTE: 1. When configuring an RS scissors machine, the machine configuration must be completed before any personality
settings can be changed. Changing the personality settings first and then changing the model number of the machine
configuration will cause the personality settings to return to default.
2. Shaded entries are not available for the selected Market.
Table 5-2. Machine Configuration Programming Information
Configuration
Digit
Setting Description
Market Default Setting
0 1 2 3 5
1
(MODEL
1
)
0
1
2
3
4
5 6RS
8RS
10RS
1932RS
2632RS
3248RS
0
2
(MARKET
1
)
0
1
2
3
5 ANSI USA
ANSI EXPORT
CSA
CE
JAPAN
0
3
(TILT CUTOUT)
0
1 NO - Drive and Lift Up NOT prevented while Tilted (Ground and Platform Mode).
YES - Drive and Lift Up prevented while Tilted (Ground and Platform Mode).
1 1 1 0 1
4
(CHARGER
INTERLOCK)
0
1 DRIVE ONLY - Drive motion prevented while vehicle is charging.
DRIVE AND LIFT UP - Drive and lift up motions are prevented while vehicle is charg-
ing. Required for CE.
0
5
(GROUND
ALARM)
0
1
2
NOT INSTALLED - Vehicle alarm will function for Arm Guard (if enabled), Overload (if
LSS enabled), and as a Horn.
DESCENT - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
enabled), as a Horn, and during Lift Down motion.
MOTION - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
enabled), as a Horn, and during Drive and Lift motions.
0 0 0 1 1
6
(LOAD)
0
1
2
NOT INSTALLED - Load Sensing System (LSS) is not fitted to the vehicle.
CUTOUT PLT - Load Sensing System (LSS) is fitted, and Platform Controls are pre-
vented in the event of an Overload. Ground Controls remain functional. This is the
default setting for CE machines.
CUTOUT ALL - Load Sensing System (LSS) is fitted. Platform and Ground Controls
are prevented in the event of an Overload.
0 0 0 1 1
7
(BATTERY)
0
1 FLOODED - Batteries are conventional lead-acid type.
AGM - Batteries are absorbed glass mat type.
0
8
(FOOT-SWITCH
0
1 NO - Vehicle is not fitted with a footswitch.
YES - Vehicle is fitted with a footswitch.
0 0 0 0 1
1001135849-B