JLG 340AJ Service Manual - Manual (Page 249)

SECTION 6 - JLG CONTROL SYSTEM
3121259 – JLG Lift – 6-5
Press ENTER to select the ACCESS LEVEL menu.
Using the UP or DOWN arrow keys, enter the first digit of the
password, 3.
Then using the RIGHT arrow key, position the cursor to the
right one space to enter the second digit of the password.
Use the UP or DOWN arrow key to enter the second digit of
the password which is 33271.
Once the correct password is displayed, press ENTER. The
access level should display the following, if the password was
entered correctly:
MENU:
SERVICE ACCESS
Repeat the above steps if the correct access level is not dis-
played or you can not adjust the personality settings.
Adjusting Parameters Using the Hand Held
Analyzer
Once you have gained Service Access, and a personality item is
selected, press the UP or DOWN arrow keys to adjust its value,
for example:
SWING:
ACCEL 1.0s
There will be a minimum and maximum for the value to
ensure efficient operation. The Value will not increase if the UP
arrow is pressed when at the maximum value nor will the
value decrease if the DOWN arrow is pressed and the value is
at the minimum value for any particular personality. If the
value does not change when pressing the up and down
arrows, check the access level to ensure you are at Service
Access.