AirLive WN-300ARM-VPN - Manual (Page 106)

AirLive WN-300ARM-VPN User’s Manual 104
Buttons There are three (3) buttons
 Refresh - Update the log data.
 Clear Log - Clear the log, and restart it. This makes new messages
easier to read.
 Send Log - E-mail the log immediately. This is only functional if the
E-mail screen has been configured.
Include in Log
Include
(Checkboxes)
Use these checkboxes to determine which events are included in the log.
Checking all options will increase the size of the log, so it is good practice to
disable any events which are not really required.
 Attempted access to blocked sites - If checked, attempted Internet
accesses which were blocked are logged.
 Connections to the Web-based interface of this Router - If checked,
this will log connections TO this Router, rather than through this Router to
the Internet.
 Router operation - If checked, other Router operations (not covered by
the selections above) will be logged.
 Known DoS attacks and Port Scans - If checked, Denial of Service
attacks, as well as port scans, will be logged.
Syslog
Disable Data is not sent to a Syslog Server.
Broadcast on
LAN
The Syslog data is broadcast, rather than sent to a specific Syslog server.
Use this if your Syslog Server does not have a fixed IP address.
Send to this
Syslog Server
If your Syslog server has a fixed IP address, select this option, and enter the
IP address of your Syslog server.